Common issues with the application of self-adhesive labels

Adhesive labels are a type of sticker widely used on various products and packaging. They are known for their convenience and ease of use, but they may also encounter some challenges during use. The following are some common problems and solutions regarding the application of self-adhesive labels: Improper peeling can cause label damage or tearing: When peeling off the self-adhesive label, excessive or uneven pulling may cause damage to the edge of the label or the entire label to tear. The correct method is to gently lift the label from one end and ensure that no air enters between the label and the surface of the object. Difficulty in alignment leads to label displacement: Alignment is a crucial step when printing with self-adhesive labels. If the position of the label is asymmetric or offset, it not only affects the aesthetics, but may also affect the communication of information. Therefore, it is recommended to conduct a small batch of trial printing to confirm alignment before printing a large number of labels. Insufficient adhesive strength leads to detachment: The adhesive of the self-adhesive label should be strong enough to withstand daily usage pressure, such as frequent touching, water vapor erosion, etc. However, in some cases, insufficient adhesion may lead to label detachment. Choosing the appropriate type of adhesive and adjusting its formula according to the specific application environment can effectively improve the adhesion of the label. The material is not suitable for a specific purpose, resulting in poor performance: different materials are suitable for different types of application scenarios. For example, for products that require frequent contact with water and oil (such as food containers), waterproof labels that are resistant to ink and do not fade should be selected; For outdoor billboards or other places exposed to sunlight, materials with high UV resistance should be considered. Poor printing quality leads to blurry information: High quality adhesive labels should be clear, visible, and easy to read. Poor printing technology can make text and patterns difficult to recognize. Therefore, choosing a professional printing service provider and implementing strict quality control is crucial. Improper storage conditions can cause labels to lose their stickiness: Adhesive labels should be stored in a dry, cool environment to avoid the effects of high temperature and humidity. Long term exposure to such an environment can reduce the adhesive ability of the label. In addition, the label should be placed flat inside the original packaging during storage to avoid folding or twisting. Difficulty in removing residue: Sometimes even if the old adhesive label is successfully peeled off, the remaining residue can be tricky. Special cleaning agents can be used to treat these stubborn residues, while being careful not to damage the surface of the adherent. To ensure the good application effect of self-adhesive labels, the following points need to be noted:; Properly operate the label stripping process&# 8211; Consider alignment issues during the design phase&# 8211; Select appropriate adhesives and materials with appropriate strength according to the actual situation&# 8211; Collaborate with reliable suppliers to ensure printing quality&# 8211; Follow the correct storage conditions&# 8211; If you need to remove old labels, please use appropriate tools and methods.